Vertical Emergency Tank Shower - SE-VTS-1

Vertical Emergency Tank Shower - SE-VTS-1

£0.00

For use where a constant water supply or adequate water pressure is unavailable, this tank is fully compliant with ANSI Z358.1 providing a guaranteed 15 minutes of water flow.

Supported on a 40mm x 40mm x 3mm hot dip galvanised (provides corrosion protection) carbon steel, square tubular frame with bolt down fixing brackets, the moulded polyethylene 2000ltr water tank is covered in 40mm reflective Kingspan Thermapitch® TP10 rigid polyurethane foam, insulation board (0.022W/m.k thermal conductivity) and the tank structure is further protected by a shroud complete with warning signage. The heating element sits in a sump to ensure it is covered at all times, even if the tank is completely empty and the system is fitted with a test activation handle which is accessed from outside the shower area.

Weights: 350kg un-laden & 2350kg filled
Heating: 2.25” BSP connection - 230v 3kw rated, wired to a rotary isolation switch
Tank capacity: 2000ltr
Flow rate: 75.7lpm over 15 minute duration
Shower head: Polished stainless steel
Wetted parts: Manufactured from non-ferrous materials
Test activation handle: Fitted outside the shower area
Visual water level indicator: Fitted on front face of tank shroud

The following optional extras are available:
• Digital high/low temperature and water level indicators
• Audible & visual alarms
• Shower area light with PIR activation sensor
• Eye wash or eye/face wash basins
• Pressure plate foot treadle for activation of main shower
• Modesty panels
• Waste water collection sump (galvanised or stainless steel)
• Trace heating for main tank feed pipe
• Trace heating for optional eye wash or eye/face wash basin
• Polished stainless steel reflective sunshield for main tank
• Stainless steel main framework

Scroll to top