Stores & Storage

FEATURES OF DRUM STORES

Designed to ensure compliance with regulations such as The Control of Pollution (Oil Storage)(England) Regulations and Pollution Prevention Guidelines PPG26 , issued by the Environment Agencies for the UK.

These units are manufactured from welded mild steel, with the shelving system built into the fabric of the unit adding to the overall strength, if a drum falls from the shelf it cannot breach the walls. The sumps, which are fully seam welded, hold 25% of the combined total of the store's capacity, it sits on hollow section plinths, which ensure that the underside of the sump does not come into contact with the ground, reducing the opportunity for corrosion to set in.

After they have been shot blasted to clean and prepare the surface they are painted to a minimum thickness of 100 microns in green RAL6029. high and low level vents are fitted as standard.

FEATURES OF IBC STORES
Manufactured from mild steel, using an all welded construction for additional strength the stores have additional; internal space built-in to the design to aid loading and unloading of the IBC's. The sumps hold 25% of the stores total capacity (110% in the case of the SIBC10 to ensure they comply with current guidelines and regulations. The stores sit on plinths, which ensure that the underside of the sump does not come into contact with the ground, reducing the opportunity for corrosion to set in. After they have been shot blasted to clean and prepare the surface they are painted to a minimum thickness of 100 microns in Blue RAL5019. high and low level vents are fitted as standard.

Colour options: Red, Blue or Green - please contact us for details.

Manufactured from mild steel and fitted with hinged steel doors with cam gear locking mechanisms, these walk-in stores provide excellent security for expensive products and allow you to control access. Adjustable shelved racking is fitted either side of the door on models WS1 and WS2 and on 3 sides in the WS6 (back wall, door side and end wall furthest from the door). The stores sit on plinths which ensure that the underside of the sump does not come into contact with the ground, reducing the opportunity for corrosion to set in. After they have been shot blasted to clean and prepare the surface they are painted to a minimum thickness of 100 microns in orange RAL2002. High and low level vents are fitted as standard.

Colour options: Red, Blue or Green - please contact us for details.

Built on a fully seam-welded galvanised sump, with base plinths, these stores use galvanised, corrugated steel wall and roof panels, which are secured with self-cutting screws. Two shelving schemes are available as optional extras allowing the stores to be configured to individual specifications. A single, lockable (2 keys provided) door is located in one of the "long" walls and the stores can be ordered in either plain galvanised or green, powder coat paint finish.

These flammable liquid storage units are manufactured to the following specification:

A rolled hollow section, fully welded frame is in filled with Hipertec wall and roof panels. The panels are manufactured with an inner insulating core of orientated fibre, high density Rockwool, with an outer skin of micro-ribbed steel sheets ( total thickness of panel 80mm). The insulation is arranged perpendicular to the plane of the panel and positioned in strips, laid longitudinally with offset joints and transversely compacted in such a way as to completely fill the space between the steel sheets.

Each unit has a 3mm thick, full-length seam welded steel sump with profiled rib strengtheners. The entire unit sits on hollow section plinths, which ensure that the underside of the sump does not come into contact with the ground, reducing the opportunity for corrosion to set in.

The sump is designed to hold 25% of the combined total of the unit's capacity in line with regulations such as The Control of Pollution (Oil Storage)(England) Regulations, and Pollution Prevention Guideline PPG26 issued by the Environment Agencies for the UK.

High and low level vents are fitted as standard, which in turn are fitted with intumescent elements, which expand to seal the vents at temperatures above 150 C. The composite panels have a powder coat paint finish.